juha Posted March 12, 2022 Report Share Posted March 12, 2022 cancheck mce18 if you connect the link to the 4g + can bus. need to change new settings for cancheck mce18? now i don't get the data to show in ecu Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 13, 2022 Report Share Posted March 13, 2022 Attach your tune and a log and some information about what you have connected. Quote Link to comment Share on other sites More sharing options...
juha Posted March 14, 2022 Author Report Share Posted March 14, 2022 I had to change the AEM 30-2226 Can converter to —> Cancheckd mce18 converter. (MCE18 - Can Bus Extension > Displays für Motormanagements (canchecked.de)) Now I can't show up information Link ecu camaro 11-3-22 rev 1can setup 150psi.pclr MCE18 CAN Wire.xlsx Quote Link to comment Share on other sites More sharing options...
juha Posted March 14, 2022 Author Report Share Posted March 14, 2022 Connected Can 2 Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 14, 2022 Report Share Posted March 14, 2022 Can you move the sensors to AIN 0-3, or AIN 4-7. They use different frames for these groups so right now you would need to set up 2 different streams to receive AIN 3 & 4. Also, what is the pressure rating on the sensors? Quote Link to comment Share on other sites More sharing options...
juha Posted March 14, 2022 Author Report Share Posted March 14, 2022 Yes i can move. only Ain4 and Ain5 Ain 4 oil pressure Ain 5 Fuel pressure 150 Psi Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 14, 2022 Report Share Posted March 14, 2022 Ok, try this. I dont see any mention on the CANchecked documentation what the bitrate is, so it may not be 1M/bit, but the ID and frame should now be set up correctly. camaro11-3-22rev1cansetup150psi V2.pclr Quote Link to comment Share on other sites More sharing options...
juha Posted March 15, 2022 Author Report Share Posted March 15, 2022 Thank you Adam. works well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.