_pkmds Posted March 12, 2022 Report Share Posted March 12, 2022 Hello guys, there's already installed PLX wideband installed in the car and im just wondering if i swap the wire that comes from the stock narrowband with analog output that comes from the PLX device will give correct values or it will have misreadings ?Its mandatory to install can-lambda? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 13, 2022 Report Share Posted March 13, 2022 You can use any wideband you like - analog or CAN is fine. You will however need to set up the input correctly with the calibration table etc. _pkmds 1 Quote Link to comment Share on other sites More sharing options...
_pkmds Posted March 13, 2022 Author Report Share Posted March 13, 2022 12 hours ago, Adamw said: You can use any wideband you like - analog or CAN is fine. You will however need to set up the input correctly with the calibration table etc. okay thanks Adamw ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.