jrizing Posted March 20, 2022 Report Share Posted March 20, 2022 Hi, Has anyone successfully setup and use traction control on a FD RX7? If so did you use fuel or ignition cut? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 20, 2022 Report Share Posted March 20, 2022 If the engine is stock internally I would be cautious of using sustained cuts. If it has good seals in it then Ign cut is the best option - if you get heavy backfires you can also use 4D fuel at the same time to add a little fuel which softens down any backfires. Quote Link to comment Share on other sites More sharing options...
jrizing Posted March 21, 2022 Author Report Share Posted March 21, 2022 Ok,thank you for the advice Adam. Quote Link to comment Share on other sites More sharing options...
jrizing Posted April 8, 2022 Author Report Share Posted April 8, 2022 Adam can you confirm when using ignition cut it will cut both leading and trailing spark? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 10, 2022 Report Share Posted April 10, 2022 Yes it cuts both. Quote Link to comment Share on other sites More sharing options...
jrizing Posted April 13, 2022 Author Report Share Posted April 13, 2022 Thanks Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.