supra11487 Posted March 29, 2022 Report Share Posted March 29, 2022 Hello all. I have installed my g4x stormx ecu in my car and wondering if anyone would have a base file or template I could start with. Engine is a jeep 4.0 based engine thats been worked over quite a bit. Just seeing if anyone has set up a jeep 4.0 in a link ecu and would be willing to share their base file. Thank you Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 30, 2022 Report Share Posted March 30, 2022 I dont but I could possibly set up a starting point. Does this one have the 18-2-2-2 flywheel trigger and the half moon thing in the distributor/CAS? What size injectors? Is that a ford idle valve? is it going to be boosted or NA? What does it have for a MAP sensor, ECT and IAT sensors? Maybe give us a list of what inputs and outputs you have stuff connected too. Quote Link to comment Share on other sites More sharing options...
supra11487 Posted March 31, 2022 Author Report Share Posted March 31, 2022 First time diving into EFI. Yes is is the factory trigger pattern that should be 18-2-2-2 and the half moon in the cam sensor. Will be running ford ev1 24lb injectors for now since I have them. Yes on the ford idle valve should be 50-100 Hz from what I have read. Gm 3 bar map sensor, factory jeep coolant sensor (can easily be changed) and a walker 210-91002 intake temp sensor. I have a picture of what I have things connected to. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.