Frank B Posted June 2, 2022 Report Share Posted June 2, 2022 Hi i just connect my vanos and having fault at when i rev on idle on exhaust and inlet i replace the connector Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 2, 2022 Report Share Posted June 2, 2022 Have you done the Cam angle test calibration? If so give us a log and the tune. Quote Link to comment Share on other sites More sharing options...
Frank B Posted June 2, 2022 Author Report Share Posted June 2, 2022 cant send larger than 6.34 Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 2, 2022 Report Share Posted June 2, 2022 You have just used up your allowance. Share it with google drive/Onedrive/dropbox/wetransfer or similar. Quote Link to comment Share on other sites More sharing options...
Frank B Posted June 2, 2022 Author Report Share Posted June 2, 2022 https://drive.google.com/drive/folders/11IZQgxz6JeOQUNwBSjtwGJQPseGPla--?usp=sharing Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 2, 2022 Report Share Posted June 2, 2022 Can you explain what the problem is. What is the log "issues with vanos disconnected" showing? Can you give us a log with the vanos set up and attempting to work. Quote Link to comment Share on other sites More sharing options...
Frank B Posted June 2, 2022 Author Report Share Posted June 2, 2022 the car idles ok but im getting inlet and exhaust bank fault everytime i rev it,. how should i log a cam angle test im getting inlet bank 1 signal tolerance fault inlet bank 2 no signal exhaust bank 1 signal ok in green exhaust bank 2 s no signal https://drive.google.com/file/d/1pfimUlv5aIwRKcLMuixz53pVsOVWQI2Y/view?usp=sharing the vanos connector is suposed to end up like this ? Quote Link to comment Share on other sites More sharing options...
Frank B Posted June 2, 2022 Author Report Share Posted June 2, 2022 i did a calibration no errors in cams for now , have to try it out Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 2, 2022 Report Share Posted June 2, 2022 That doesnt look like you have removed the factory connector. Can you confirm you chopped this off and fitted a normal connector with no diodes inside? Quote Link to comment Share on other sites More sharing options...
Frank B Posted June 9, 2022 Author Report Share Posted June 9, 2022 no i did not replace those i replace the other end, i did go to the dyno with vanos disable got 500whp + on 95 ron ill go back to this topic thou would like to enable the vanos later on. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 9, 2022 Report Share Posted June 9, 2022 You need to remove the connectors I have circled above, they have a diode in them which will prevent them working with low side drive. Quote Link to comment Share on other sites More sharing options...
Frank B Posted November 24, 2022 Author Report Share Posted November 24, 2022 For vanos delete do i need the option with the triggers? Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 25, 2022 Report Share Posted November 25, 2022 Sorry I dont understand the question. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.