Celeritas Posted June 4, 2022 Report Share Posted June 4, 2022 I'm currently running into an Error 16: Cannot reach target 98% when trying to calibrate my E throttle. I'm running a Bosch 0280 750 036 from a VW 1.8T (mk1 TT) on my N300+ Its wired as per the attached diagram. PID Values are P 7.00 I 0.137 D 40.00 which were taken from the TT base map. Motor appears to move freely during initial calibration but just fails on the final part comparing main and sub tps. I've attached a log and my map and here's a link to a video showing what's happening. I tried swapping sub and main values on the map but it still fails at the same point. I'm assuming motor polarity is correct as the throttle plate appears to be reaching 100% initially. I've also tried 2 other spare throttle bodies and they all have the same behaviour. Any suggestions on what I have missed? r32-040622-neo-fuelvalues.pclr e throttle calibration.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 4, 2022 Report Share Posted June 4, 2022 Suspect your max clamp of 30% isnt enough power to fully open the throttle. Can you set that to 90% and give it another try. Celeritas 1 Quote Link to comment Share on other sites More sharing options...
Celeritas Posted June 5, 2022 Author Report Share Posted June 5, 2022 Yep that did the trick, thanks Adam. Hopefully that's everything tested and working now and I can get the car off too an experienced tuner for mapping now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.