jvincent4103 Posted June 29, 2022 Report Share Posted June 29, 2022 Ive had no issues with the Lamda working until the last few runs A couple runs ago the sensor cycled through error codes 33&34&16 several times prior to actually getting up to temp and functional as normal. Now all i see is disabled and the sensor temp is frozen at 32F. Even if i select yes to run when stalled I can't get the sensor heat. I've replaced the sensor now and see no change. Any thoughts? I've considered adding the CAP but I'm not sure that's the issue I'm having. Attached is the screen shot of the last time it started working about half way through the run. EDIT, I am running the CAN LAMBDA module. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 29, 2022 Report Share Posted June 29, 2022 16,33&34 are generally power supply related. Assuming the wires are big enough and the source is capable of supplying the required current then the first thing I would do is add the cap. Quote Link to comment Share on other sites More sharing options...
jvincent4103 Posted July 6, 2022 Author Report Share Posted July 6, 2022 The CAP appears to have fixed the issue... Thanks for the help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.