theo calvez 1jz Posted July 18, 2022 Report Share Posted July 18, 2022 hello, i think i have a problem with both of trigger signals trigger one is on the crank sensor trigger 2 is on the cam sensor (the one on the cam pouley side) and the trigger scope doesn't looks good i think the engine cranks make some explosion noise but no starts the tank is full of e85 as i already drove the car with e85 before i attached the screenshot of the trigger scope and the full base map thanks for the help :) G4+ Fury chaser.pclr Quote Link to comment Share on other sites More sharing options...
theo calvez 1jz Posted January 19, 2023 Author Report Share Posted January 19, 2023 ok i 've found my problem was my trigger callibration that was 360° wrong Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 19, 2023 Report Share Posted January 19, 2023 Sorry I missed your original post. Can you do another trigger scope now it is running, the reason being in the scope you attached above the shape of the waveform looks very much like the crank sensor is wired back to front. It hasnt captured a full crank revolution though so I cant say for sure - but it is definitely suspect enough that it is worth another scope. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.