RKGarage Posted August 9, 2022 Report Share Posted August 9, 2022 Link Fury G4+ Timing when under light load keeps changing from the igntion table to -4 degrees and 8 degrees. Have attached the tune file and a log.Other log is too big that has most of the -4 degree parts. Cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 9, 2022 Report Share Posted August 9, 2022 Not really enough logged to be confident - a PC log would be more useful, but I suspect most likely it is traction control, it has a slip target of between 0&5% which is very tight and will apply up to 20deg retard and 40% cut if the slip is exceeded. Quote Link to comment Share on other sites More sharing options...
RKGarage Posted August 9, 2022 Author Report Share Posted August 9, 2022 No worries, I will get out there and do a pc log this time. Have disabled traction control rather than having the activation switch off and shall see how it goes. Cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 9, 2022 Report Share Posted August 9, 2022 43 minutes ago, RKGarage said: rather than having the activation switch off There is no traction disable switch set up in the map you attached above, it would be active all the time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.