keizsr Posted August 11, 2022 Report Share Posted August 11, 2022 hello I control the engine fan with water temperature I also measure the temperature of the water before entering the engine.BET is the name of the borrower. Can one electric fan be controlled redundantly with water temperature and BET? For example, water temperature 90 degrees on 88 degrees off bet 85 degrees or more on Quote Link to comment Share on other sites More sharing options...
Vaughan Posted August 11, 2022 Report Share Posted August 11, 2022 Example uses the standard engine fan control and then the output is turned on if either standard fan control (ECT) says to turn on or if BET is 85deg C or over keizsr 1 Quote Link to comment Share on other sites More sharing options...
keizsr Posted August 11, 2022 Author Report Share Posted August 11, 2022 Amazing Thank you for your time. I will set it up immediately. Thank you for the quick response of the team Vaughan 1 Quote Link to comment Share on other sites More sharing options...
keizsr Posted August 11, 2022 Author Report Share Posted August 11, 2022 Mr. Vaughan I took a test drive after setting Result: Very good; Stable at around 86 degrees even during traffic jams After all, managing with BET seemed better in my case This summer's greatest achievement Thank you very much Vaughan 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.