Kelly Posted September 17, 2022 Report Share Posted September 17, 2022 Hey guys! I have a Link G4X in my 1999 Subaru gc8 gravel rally car. We had an engine fire last event. Ever since, the car will idle/drive fine until all of a sudden the rev count drops to 0, the car itself revs higher, and it starts to break down and back fire. From what we can see we’ve checked all the wiring (it’s fine) checked all and changed any sensors that were damaged. A bit stuck on what it can be. Thanks : ) IMG_6718.MOV IMG_6718.MOV Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 17, 2022 Report Share Posted September 17, 2022 The place to start would be to set up ECU logging with a range of common parameters - things like RPM, dwell, trigger error counter, ign & fuel cut, bat voltage, inj PW, all engine sensors, set it to log all the time. The next time it plays up download the most recent log out of it and you should hopefully have some clues whats going on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.