Gp rotary switch

[TOMMYFD]

Hey, hooked up my 12 position rotary switch for boost tables and i put position on y axis but what i want to do is change to a complete table using virtual auxilary but it seems I cant understand how its made any help?

[Adamw]

Example below would switch to boost table 2 for any switch position above 2.

[TOMMYFD]

Thanks alot Adamw. What if I want to add the 3rd table also?

[Adamw]

Example below would give you boost table one with switch in pos 1, boost table 2 when switch is in pos 2 or 3, and boost table 3 when switch is in pos 4 or higher.  

[TOMMYFD]

Thanks Adamw!

[TOMMYFD]

Can I have a fuel table change after my rotary switch turns over 4th position. The thing I want to do is boost with water meth on 1-3 positions with different boosts on the rotary switch and 4 position and up 3 different boost options with no water meth, my boosts will be on a (x -y) axis no boost table change just changing fuel table over position 4.

[Adamw]

Yes, it would be basically the same as my first example above.

[TOMMYFD]

Thanks Adamw