Ümit Posted October 3, 2022 Report Share Posted October 3, 2022 Hi I need G4X wrx11x plug and play ecu can setup and wiring info for aem cd7 dash display connection has made ecu main board can H and can L but not receiving Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 3, 2022 Report Share Posted October 3, 2022 Connect CAN H & L on the ECU to CAN2 H & L on the dash. A CANJST4 cable is the easiest way to connect at the ECU end. Set up instructions for both the ecu and dash are in the AEM dash help file under 3rd party support>Link G4+. If you have any more specific question I may be able to offer better advice. Quote Link to comment Share on other sites More sharing options...
Ümit Posted October 9, 2022 Author Report Share Posted October 9, 2022 On 10/4/2022 at 12:13 AM, Adamw said: Connect CAN H & L on the ECU to CAN2 H & L on the dash. A CANJST4 cable is the easiest way to connect at the ECU end. Set up instructions for both the ecu and dash are in the AEM dash help file under 3rd party support>Link G4+. If you have any more specific question I may be able to offer better advice. Thanks adam I can not select the same parameter which is showed on aem dash help file as below on link G4x pc software has below screen I select transmit dahs2pro rest of settings value applied the same but still no signal on my cd7 display I attached also following error codes from dash display Many thanks in advance Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 9, 2022 Report Share Posted October 9, 2022 You need to set mode to "Transmit Generic Dash" just like the picture. DASH2PRO is a completely different format. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.