Andy1205 Posted October 10, 2022 Report Share Posted October 10, 2022 Using a K20Z4 engine on a Link G4X Fury and need help with base map settings. Going to be to be using E-throttle but i can configure that later. Just need help getting all the config sorted. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 10, 2022 Report Share Posted October 10, 2022 This is not an engine Im intimately familiar with, but likely the "Monsoon Honda K20 Modelled Fuel CLL" map in the PC Link Basemaps folder will have a lot of the basics needed. Connect exhaust cam sensor to trig 2 and intake cam to a DI. Quote Link to comment Share on other sites More sharing options...
Andy1205 Posted October 13, 2022 Author Report Share Posted October 13, 2022 On 10/10/2022 at 9:20 PM, Adamw said: This is not an engine Im intimately familiar with, but likely the "Monsoon Honda K20 Modelled Fuel CLL" map in the PC Link Basemaps folder will have a lot of the basics needed. Connect exhaust cam sensor to trig 2 and intake cam to a DI. Thank you so much for you reply im sure when the time comes this will get me going so i can get it on the dyno. Im new to all this stuff myself and am wanting to get into tuning so i thought this would be a great first start. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.