Monster Posted November 29, 2022 Report Share Posted November 29, 2022 Hi all, I have a vr4link g4+ Currently and I am curious if I would be able to get the proper connectors for it and wire it up in my evo swapped mirage? Basically treating it as a wire in extreme unit? Quote Link to comment Share on other sites More sharing options...
Confused Posted November 30, 2022 Report Share Posted November 30, 2022 Yep, that's pretty much what I've done with my 6A13TT engine in my Ford Anglia with an Evo 1-3 ECU. You'll have to adhere to any limitations on the board, such as on the Evo 1-3 Ignition 4 is used for ECU Hold Power (to keep the ECU powered after turning off the engine, so that the Idle Speed Control stepper motor can reset itself to the start-up position), so I couldn't use sequential ignition. But other than that, and if it's got enough inputs & outputs available between the main connector and the expansion ports to do what you want, it's potentially a cheaper way of getting going. Although it's based upon an Xtreme, the number of inputs & outputs made available vary based upon the target chassis, which is the main difference between the models and why there are price differences between the Plug-In models. Quote Link to comment Share on other sites More sharing options...
Monster Posted November 30, 2022 Author Report Share Posted November 30, 2022 I appreciate the response! It’s about in-line with what I was thinking myself. Just happy to hear someone having success. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.