David.J Posted December 15, 2022 Report Share Posted December 15, 2022 Hello, I'm newbie in this world I have a problem with my Evo 9 and needing Help. After a few years the car was stopped, i decided to refurbish them 2 month ago. But now the engine doesn't start. The ECU was sended to NR Autosport in UK to remove the password and getting the cable to connect the ECU to computer.Sended in 2014. Now i have linked the ECU and the engine doesn't start. I put de evo9 pcl base Map but doesn't work they have something wrong with the base Map and getting some faults. Faults Codes: 14,20,22,26,49 (engine light blinking) The car doesn't have Maf. Parts inside: RC Injectors PL9-1200 AEM 340 Fuel Pump AMS Fuel Rail JUN Cams TOMEI Exhaust Cam Gear I appreciate Help It's About 2 weeks i try to start but nothing and i'm newbie on that. I'm sorry for my poor english. Regards and thanks. David (Pics of the PNP ECU added) Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 15, 2022 Report Share Posted December 15, 2022 None of those fault codes will prevent it from running, they are likely just the fault settings set up wrong. Code 14 is for AN Volt 2 which is not connected to anything, 22 is for the power steering switch which just needs the fault settings disabled, 26 is for AN Volt 6 which again is unlikely connected to anything. Please do a log of it cranking and attach a copy of your tune. some guidance on how to do a log: https://www.youtube.com/watch?v=_P1LRANeO4A Quote Link to comment Share on other sites More sharing options...
David.J Posted December 21, 2022 Author Report Share Posted December 21, 2022 On 12/15/2022 at 10:40 PM, Adamw said: None of those fault codes will prevent it from running, they are likely just the fault settings set up wrong. Code 14 is for AN Volt 2 which is not connected to anything, 22 is for the power steering switch which just needs the fault settings disabled, 26 is for AN Volt 6 which again is unlikely connected to anything. Please do a log of it cranking and attach a copy of your tune. some guidance on how to do a log: https://www.youtube.com/watch?v=_P1LRANeO4A Thanks Adamw, i try today that you have said, they have new fault added 20 and 49 when i re-install the evo IX base map do you have pin outs of evo IX PnP ECU? i tell you something later when i tryed V-Series does work with GLink Firmware? Quote Link to comment Share on other sites More sharing options...
David.J Posted December 21, 2022 Author Report Share Posted December 21, 2022 Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 22, 2022 Report Share Posted December 22, 2022 The pinout is in the help file. The fault codes are not relevant. You cant use PC Link with a Vipec ecu. The Vipec software has more functions anyhow. Can you do a log of it cranking and attach a copy of your tune. Quote Link to comment Share on other sites More sharing options...
David.J Posted January 4 Author Report Share Posted January 4 Mitsubishi EVO 9 MIVEC V88 Plugin DAVID 04 01 2023 DOESN'T START (RC INJECTORS PL9-1200, AEM 340LPH FUEL PUMP,AMS FUEL RAIL,AAC JUN,TOMEI PULLEY EXHAUST).pcl Log 4-01-23 4;46;29 pm EVO IX MIVEC DOESN'T START.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 4 Report Share Posted January 4 Can you try attaching those files again. Are the files showing as .pcl and .llg on your computer? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.