olivier Posted February 19, 2023 Report Share Posted February 19, 2023 hi all, it's my MAP attached, someone can tell me if all are right? best regards G4+ Ford Fiesta WRC v1.1 modif ralenti 26-12-22.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 20, 2023 Report Share Posted February 20, 2023 Sorry your question is not very clear. Is there something more specific that you are worried about? Are you trying to solve a problem or just checking before tuning? My first suggestion after a quick look is to update your firmware, you have 5.6.6 which is quite old, 5.6.8 is current. Does the engine only have 1 tooth on the camshaft? No VVT? Quote Link to comment Share on other sites More sharing options...
olivier Posted February 20, 2023 Author Report Share Posted February 20, 2023 thanks Adamw sorry for my english, i just to know if the man who set up my car on the roller are mad a good job or not? also i m not VVT just 1 thoot on camshaft it's a focus rs mk1 engine zetec 2L turbo kind regards olivier Quote Link to comment Share on other sites More sharing options...
olivier Posted February 21, 2023 Author Report Share Posted February 21, 2023 hi Adam, have you got a time to aswer me please? kind regards olivier Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 21, 2023 Report Share Posted February 21, 2023 Most of the basic fundimentals look to be set up correctly in your map, but the Fuel and Ignition tables are pretty crude looking and dont give me the impression that they have been tuned steady state to achieve best torque and correct air fuel ratio at all operating conditions. But really this is speculation based on my experience, I couldnt say this with absolute certainty. It really comes down to how well it drives and performs. Quote Link to comment Share on other sites More sharing options...
olivier Posted February 22, 2023 Author Report Share Posted February 22, 2023 ok many thanks for all , i think i need to set up on the roller again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.