kevin p Posted March 6, 2023 Report Share Posted March 6, 2023 Hi Everyone, I'm having an issue with the over run cutoff. When it gets to the parameter for the fuel cut to turn on, the engine oscillates. File and log is attach for viewing. Thanks Log: https://drive.google.com/file/d/1sZoVHGQmcMARyHwY7GddcBh_rmiSCCrA/view?usp=share_link File: https://drive.google.com/file/d/1pBfxajJeu-XcWx9FHgsx_zQMh4mGWey6/view?usp=share_link Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 6, 2023 Report Share Posted March 6, 2023 The torque is being introduced too quickly. Try settings like below. Increasing retard and the introduction time will bring torque back in slower but if you go too far it will feel lethargic, so you need to experiment with the balance here a little. Quote Link to comment Share on other sites More sharing options...
kevin p Posted March 6, 2023 Author Report Share Posted March 6, 2023 Ok I will try that. Also, the ecu is not getting request signal from the A/C switch. I tested the a/c unit, and it works. It's a 2005 WRX Thanks Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.