danamaniac Posted March 13, 2023 Report Share Posted March 13, 2023 Hello, I got a link dash and everything is working good except for speed. Also it is possible to show lambda as AFR. Is it possible to correctly display boost instead of absolute pressure. Lastly, can i get fuel temp to display. Cheers. Quote Link to comment Share on other sites More sharing options...
danamaniac Posted March 13, 2023 Author Report Share Posted March 13, 2023 I think i know why its not working, looks like speed 1-4 is tied to di 1-4, my VSS is wired to DI 5, is there a way we can get di5 as speed source? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 13, 2023 Report Share Posted March 13, 2023 Assuming you have a G4+ ecu since you are posting in the G4+ forum, then the 4 speed channels in the Aim software are linked to the LF/RF/LR/RR wheel speed channels in the ecu, so as long as your DI5 is assigned to one of the wheel speeds it should work. The Lambda units is a bit quirky as we had to compromise a little to allow the dash to work with our older ecus which transmit AFR as well as the newer ones which transmit lambda. So you have to set up a math channel, it is pretty simple: In RS3 open your dash config, go to >math channels>add channel>linear corrector. Set up like pic below. You can then assign the new "AFR" math channel in the display pages rather than the ecu lambda channel. Quote Link to comment Share on other sites More sharing options...
danamaniac Posted March 14, 2023 Author Report Share Posted March 14, 2023 Thankyou, what about getting boost to display properly instead of absolute? is there a solution for that? Quote Link to comment Share on other sites More sharing options...
danamaniac Posted March 14, 2023 Author Report Share Posted March 14, 2023 ANYBODY? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 14, 2023 Report Share Posted March 14, 2023 MGP is already in there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.