ae82ted Posted March 17, 2023 Report Share Posted March 17, 2023 Hi, Recently installed a WRX11 G4X plugin ECU to a GR WRX STi, everything works well and is tuned well however the ABS light and the key immobilizer light keep on on the cluster. Is there anyway can make them off with ECU setting? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 17, 2023 Report Share Posted March 17, 2023 For the ABS lamp, did you try the alternative CAN mode? After changing you need to store then switch ign off and back on again for the ABS to reset. The immobiliser lamp is not one we can solve, it relies on an encrypted serial communication and registration of the ecu with the other related modules. You can disconnect pin A10 from the BIU to disable the security lamp if you wish. Quote Link to comment Share on other sites More sharing options...
ae82ted Posted March 17, 2023 Author Report Share Posted March 17, 2023 Thanks Adam, Tested and it works with alternative CAN setting. One more question. I can see the S Mode switch signal at CAN AN1. how I can set it up for switching dual boost targets. Tried to create with GP Rotary switch, but at the boost target table 2 activation setting I can't pick GP Rotary switch as an option. Thanks for your suggestion. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.