Guilty Garage Posted March 22, 2023 Report Share Posted March 22, 2023 I’m doing an overly elaborate NB1PNP, this would be more suited towards a wire in but I’m doing it to prove a point of just how powerful even the PNP are. Anyway, I did all my wiring planning over the past month and when I went to apply it I noticed a discrepancy in the expansion connector vs the PDF. PDF states a DI10 on the expansion sub but it seems instead of there is Vb+ there instead. I assume the board is correct, rather than the PDF. Wasn’t sure if there would be a better place to report. Thank you for all that you do Quote Link to comment Share on other sites More sharing options...
Vaughan Posted March 22, 2023 Report Share Posted March 22, 2023 I'll double check which one of these is correct (most likely the board) and get whichever is wrong fixed. Thank you Quote Link to comment Share on other sites More sharing options...
Vaughan Posted March 23, 2023 Report Share Posted March 23, 2023 Confirmed the PCB is correct, have updated the help manual Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.