Fodder Posted May 26, 2014 Report Share Posted May 26, 2014 I'm fully wired now and trying to get the software configured correctly. What I'm stuck on is correctly setting up Aux 9 & 10. In the drop down menu there doesn't seem to be an Aux 10. Also, the Aux 9 choices don't include a "Motor +" option. See screenshot below. Does switching the E-Throttle mode to "ON" take care of these two Aux channels on it's own or do I still need to do something? Quote Link to comment Share on other sites More sharing options...
Simon Posted May 26, 2014 Report Share Posted May 26, 2014 Hi From the looks of the screen shot you are working with either a i88 plugin or at least a plugin map. In this case Aux 4 will need to be set as EThrottle Signal 1 this effectively controls Aux 10 Aux 9 is then selected as EThrottle Signal 2 If you have a i88 wire in you will find when you connect to the ECU or use the i88 wirein base map it will show aux10 and this can be set as E throttle signal 1 Quote Link to comment Share on other sites More sharing options...
Fodder Posted May 27, 2014 Author Report Share Posted May 27, 2014 Ah ha! I have been modifying plug-in maps that come in the iVTS software. On your suggestion I opened a wire-in base map and, sure enough, Aux 10 is available, as well as EThrottle (+) & (-) options for Aux 9 & 10. Thank you Simon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.