randolph Posted April 22, 2023 Report Share Posted April 22, 2023 Hello, just installed a wrx11 plug-in on a 09 hatch sti that comes with the si system. wondering if anyone have workout a configuration to get this feature to work with link. i believe the button is connected via can to the oem(not sure). if it can be made to work then i would setup the throttle target map,boost and possibly ign timing map to be altered with. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 23, 2023 Report Share Posted April 23, 2023 I have sent you an email since the forum is broken. Quote Link to comment Share on other sites More sharing options...
Dario Holder Posted August 25, 2023 Report Share Posted August 25, 2023 can you also send me info on this as well On 4/22/2023 at 8:01 PM, Adamw said: I have sent you an email since the forum is broken. Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 26, 2023 Report Share Posted August 26, 2023 Copy and paste from the email: The SI Drive status is received into the ECU as CAN AN1. It can have a value of 1, 2 or 3. You can use this in various ways depending on how complicated you want to make things. For example the most simple would be to just put CAN AN 1 directly on 1 axis of your boost and throttle tables and a 4D ign table (not really sure why you would need to change ignition unless it was for different fuel, but you can if you want), or have 2 tables for each and use CAN AN1 to blend between them. Another option would be to use GP outputs to completely switch between 3 different boost/throttle/Ign tables I have attached some pictures to show some examples. Use SiDrive directly on a table: Use SiDrive to blend 2 tables: Use SiDrive to switch between 3 separate tables: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.