DerekAE86 Posted April 25, 2023 Report Share Posted April 25, 2023 It would be nice to set a Aux/Digital/Virtual input that enables LT CLL so you can have it tune under certain conditional states. Examples would be; when VVT activates or when AC is on. I thought I could set one axis to Aux Status for example and do a rudimentary 1/0 vs RPM table. But then of course LT CLL is operating during the "off" state too which I don't want. Even if I remove the Aux Status "0" Row and just leave the "1" row it will still interpolate in the "1" row when the current status is "0" Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 26, 2023 Report Share Posted April 26, 2023 Quote Link to comment Share on other sites More sharing options...
DerekAE86 Posted April 26, 2023 Author Report Share Posted April 26, 2023 Nice! Quote Link to comment Share on other sites More sharing options...
DerekAE86 Posted April 27, 2023 Author Report Share Posted April 27, 2023 Would it be possible to have a user configurable lockout for the CLL as well as the LT trims? Currently we have ECT/RPM/TPS/MAP/Delta. But it would be nice to have a GP setting as well that would then respect the "Reactivation Delay". Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.