ian Posted April 27, 2023 Report Share Posted April 27, 2023 Fan is on constantly from putting the ign on. The output wire has constant 11v neg out of it. Even when running a test off the laptop. It was all working ok. I've taken engine out and put back in and now it's like this. Any ideas Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 27, 2023 Report Share Posted April 27, 2023 What ecu do you have? What do you mean by "11V negative"? What is your volt meter connected to? Quote Link to comment Share on other sites More sharing options...
ian Posted April 28, 2023 Author Report Share Posted April 28, 2023 So it's a link atom. So I have 1 Side on the battery positive and then I have other side to the orange and brown wire. (Fan wire) and it's showing battery voltage constantly. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 28, 2023 Report Share Posted April 28, 2023 Can you attach a copy of your map. Do you have the same voltage on the orange/brown with the fan relay unplugged? Quote Link to comment Share on other sites More sharing options...
ian Posted April 28, 2023 Author Report Share Posted April 28, 2023 Yes relay unplugged. Map is good I've checked that. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 28, 2023 Report Share Posted April 28, 2023 4 hours ago, Adamw said: Can you attach a copy of your map. Can you do a quick pic showing how the relay is wired also. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.