Crown 1jz Posted April 30, 2023 Report Share Posted April 30, 2023 Hi there, im looking at getting my hands on a link monsoon ecu for my 1jz gte vvti toyota crown, i know that i set the spark to wasted so it can use only 3inputs but my problem is that ive fitted coil on plugs from a toyota yaris and im not sure on how to set the ecu up with this ignition setup. the factory toyota igniter is deleted and runs off 3 igt signals from existing wiring to ecu. thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 30, 2023 Report Share Posted April 30, 2023 Wire cyl 1 & 6 coil to Ign 1, Cyl 2&5 to Ign 2 and cyl 3&4 to Ign 3. Quote Link to comment Share on other sites More sharing options...
Crown 1jz Posted April 30, 2023 Author Report Share Posted April 30, 2023 7 hours ago, Adamw said: Wire cyl 1 & 6 coil to Ign 1, Cyl 2&5 to Ign 2 and cyl 3&4 to Ign 3. How about the injectors? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 30, 2023 Report Share Posted April 30, 2023 Set injection mode to sequential, wire the injectors as below. This will give you semi-sequential injection. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.