DP Tuned Posted May 15, 2023 Report Share Posted May 15, 2023 Hello! I'd like to know on what addresses the CAN AUX outputs are sent status, freq and duty? I'm setting up a customer with a PMU16 and I would like to use the can aux outputs, especially for ethrottle since I can't use a Virt AUX and that's how I used to send aux to the PMU16... Thanks! Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 15, 2023 Report Share Posted May 15, 2023 You can send them on any ID and in any format you like, sending a CAN aux is the same as sending a virtual aux. Quote Link to comment Share on other sites More sharing options...
DP Tuned Posted May 15, 2023 Author Report Share Posted May 15, 2023 I see, but I thought they had hard coded ones that I could use without having to create any streams. I think I found what I need in the help file. If I select Razor PDM as mode and pick an ID it will send it there Then I just need to create a can message object on the PMU, thank you! Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 15, 2023 Report Share Posted May 15, 2023 No, the ecu will only send and/or receive whatever you set it up as a CAN channel. You could use the Razor PDM stream if you wanted (format is described in the help file) which does both transmit and receive on the same channel, but from memory the PMU cant send compound CAN messages so you are probably better to just stick with a basic user stream. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.