Barra58 Posted October 15, 2014 Report Share Posted October 15, 2014 Hi All, I'm trying to get my racepak UDXSR dash and ViPec vnet module to read from my V88, have set up the dash ok and am trying to find out what the channel id is from Racepak, however my question hear is, how do I change the channel ID in the canbus configuration in VTS, I have the latest version and firmware has been upgraded ECU ser # is 12xxx, I have tried to change the id but it keps reverting back too ID 1000 or ID 0 I have hit apply each time I have tried to change and even tried a store but no success. Regards, laurie Quote Link to comment Share on other sites More sharing options...
Barra58 Posted October 15, 2014 Author Report Share Posted October 15, 2014 So here is my pcl! hopefully anywayXH GTX3582R 1000 cc injectors and new cam settings.pcl Quote Link to comment Share on other sites More sharing options...
Simon Posted October 15, 2014 Report Share Posted October 15, 2014 If you are typing in the new ID make sure you hit enter after, and then apply and store. Quote Link to comment Share on other sites More sharing options...
Barra58 Posted October 15, 2014 Author Report Share Posted October 15, 2014 Thanks Simon, i'll give it a go when i get back home on Monday. Cheers, Laurie Quote Link to comment Share on other sites More sharing options...
Barra58 Posted January 15, 2015 Author Report Share Posted January 15, 2015 G'day all so yesterday, finally had success and turned out to be really simple, was on the Racepak forum and typed in the right search info for once, and turns out it has nothing to do with can bus as the interface lead is serial, stupid me, so anyway here is a link for anyone else trying to do this and also there is mention of a proper can bus interface but is only available as one off specials. http://www.racepak.com/forums/viewtopic ... 8+with+udx Cheers, laurie Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 15, 2015 Report Share Posted January 15, 2015 Hi Laurie, how are you mate, Thanks for clearing all that up and posting the link. Sometimes things are so clear you miss them, I do this also sometimes, ha ha Regards Dave. Quote Link to comment Share on other sites More sharing options...
Barra58 Posted January 15, 2015 Author Report Share Posted January 15, 2015 Hi Dave, Yeah doing alright Mate, How's your good self, hopefully well on the mend. Talk soon laurie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.