augusto Posted October 28, 2014 Report Share Posted October 28, 2014 Hello to all every time I turn on the new iVipec -88 these messages appears on the screen. How to solve this problem. Augusto. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted October 28, 2014 Report Share Posted October 28, 2014 Hi, is the ECU unlocked, Have you setup the fault settings for the inputs. Is this a plug in base ECU for EVO. Regards Dave, Quote Link to comment Share on other sites More sharing options...
augusto Posted November 5, 2014 Author Report Share Posted November 5, 2014 Please look at the picture of the email and see that the ecu is blocked. Everything works temperature tps, map, no signal rpm, although the waveform displayed on the oscilloscope. But the engine does not star. Augusto. Quote Link to comment Share on other sites More sharing options...
Simon Posted November 5, 2014 Report Share Posted November 5, 2014 You will need to get the unlock code to enable the ECU. Once enabled the ECU will then be able to show / register RPM. Currently the ECU is not able to run an engine. The unlock code should be provided through the dealer that supplied the unit to you. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted November 7, 2014 Report Share Posted November 7, 2014 Hi Augusto, have you had your ECU unlocked yet. Let me know, as I know you I am prepared to help, but you MUST ask your DEALER first. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.