rune Posted March 30, 2015 Report Share Posted March 30, 2015 My car (supra vvti) has been down for a while but soon ready for the street again.Im going to do the cam angle test to find the vvti offset value.In my base map digital1 is set as speed,I change that to vvt cam position,inlet lh and choose offset 170 as default during test? I already set a vvti inlet target map and it communicates with the cam.After test do I change trig 2 vvti to new value or keep default value?Im very happy if someone can guide me thrue this,thanks Rune Quote Link to comment Share on other sites More sharing options...
Simon Posted April 1, 2015 Report Share Posted April 1, 2015 Once you ahve run the test and have the lowes value you will change the trigger 2 vvt offset to match. Quote Link to comment Share on other sites More sharing options...
rune Posted April 3, 2015 Author Report Share Posted April 3, 2015 Ok thanks.I was reading thrue old threads about this and it was some misleading information:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.