Janko_D Posted June 22, 2015 Report Share Posted June 22, 2015 Hallo, I'm installing a Storm Ecu on 2004 6-port RX-8 but I have problem with the motor that opens the auxiliary ports - how to wire it in and how to set up the auxillary outputs. If you have any base map for renesis engine to help me to start, that would be superb. Best regards, Janko Quote Link to comment Share on other sites More sharing options...
Simon Posted June 24, 2015 Report Share Posted June 24, 2015 Hi Janko We have very little info on the RX8 engine. Looking at what info I can find through Google the runner control is based of solenoids which can be wired to AUX outputs on the ECU and set as GP outputs with conditions set as required. There also appears to be a APV motor which will likely be a problem to control as it would require a special driver to allow the motor to be driven open and closed. Where are you based? As a rotary specialist would be worth asking if they have ever used this valve. Quote Link to comment Share on other sites More sharing options...
Janko_D Posted June 25, 2015 Author Report Share Posted June 25, 2015 I am from Bulgaria. All solenoids are working fine. For the APV Motor (DC Motor) I will use H-Bridge Driver to control it properly. Thanks for the reply. Best regards, Janko Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.