Jump to content

DI 1 input for G3 LEM running adaptalink query ???

Kenian Fatherley

Recommended Posts

Hey guys , Im running a g3 LEM with a adaptalink on a s14 sr20det . My question is this : - With the adaptalink DI 1 / aux 4 can be setup to run either the aircon request signal or Vehicle speed sensor with the selection of jumper 1 on the adaptalink box .. I want to setup a switch to run either 12v or a earth to DI 1 for antilag selection .. How can i do this ? The car has no aircon and due to modified steering knuckles had ne wheel speed sensors hooked up either .. Can i splice the switched and relayed 12v or earth feed to say the vehicle speed sensor wire on the stardard ecu plug and select J1 to vehice speed sensor setting and then select DI 1 on PClink as antilag activation ??? Or is there another way to setup DI 1 with a switch to select the anti lag mode ? Any help much appreiciated ! Kenian .

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...