Matt Holmes Posted December 6, 2009 Report Share Posted December 6, 2009 I have the motor tuned pretty good with a master fuel setting of 34 and the zone fuel numbers varying between 40-50. I am upgrading my injectors from 490cc to 788cc. I have a tuning module and a wideband datalogger but am looking for a little guidance on where to start. Any ideas on how much lower I should set the master fuel so that I'm not running way too rich to begin with? Quote Link to comment Share on other sites More sharing options...
Matt Holmes Posted December 7, 2009 Author Report Share Posted December 7, 2009 I should clarify that I have a pre LinkPlus model (not sure which exact version) with a master fuel and zone fuel range of 0-99. I noticed through this forum that the Link-Plus units have settings from 0-255. I am upgrading the injectors because I will be upping the boost and was close to maxing the injectors out as it was. Quote Link to comment Share on other sites More sharing options...
Simon Posted December 8, 2009 Report Share Posted December 8, 2009 I would bring your master down to about 20 and see how that goes. You will be able to ball park it at idle relatively quickly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.