kevin marshall Posted October 24, 2011 Report Share Posted October 24, 2011 just bought a link ecu & controller and want to find out abit about it,its got a sticker on the chip which reads 42v1 030196 the chip reads MC68HC711E9CFN2 5C47M QQQC9528 theres also a technitions sticker from EDAC SYSTEMS ltd Christchurch. Cheers for any assistance,Kev: Â Quote Link to comment Share on other sites More sharing options...
Simon Posted October 30, 2011 Report Share Posted October 30, 2011 What you have is a early LEM G1 it is for a distributor application the manual can be downloaded from here http://www.linkecu.com/support/documentation/g1-engine-management-documentation/lemv3manual This is for a V3 but is very similar. Quote Link to comment Share on other sites More sharing options...
kevin marshall Posted November 1, 2011 Author Report Share Posted November 1, 2011 thanks for that Simon,however when i go to this link or any of the g1document links nothing comes up on the screen,it just shows Done in the bottom left corner of screen.,same applies to looms just nothing shows on screen.Does this mean g1s are no longer supported? or am i doing something wrong? Cheers for any assistance Kev: Quote Link to comment Share on other sites More sharing options...
Simon Posted November 2, 2011 Report Share Posted November 2, 2011 It should download a PDF it might be doing the download and saving to a temp location but not be opening. If you right click on the link you might be able to do a save as and then open the saved file. Quote Link to comment Share on other sites More sharing options...
kevin marshall Posted November 2, 2011 Author Report Share Posted November 2, 2011 yeahp got that sorted thanks Simon,one other thing is this / or can this ECU be pc tunable? Quote Link to comment Share on other sites More sharing options...
kevin marshall Posted December 15, 2011 Author Report Share Posted December 15, 2011 can this ecu be tuned via pc useing a serial link / com link ?i have a hand controller but would like to know my options,thanks for your assistance, Kev: Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted December 16, 2011 Report Share Posted December 16, 2011 Hi Kev. Anything prior to V4 (eg yours) can only be tuned with the hand controller. It can be upgraded to V5 to allow for PC tuning, but contact me on [email protected] for pricing. Jurgen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.