928sg Posted June 16, 2023 Report Share Posted June 16, 2023 here is the current dwell table. This is a 6.4 liter NA motor. I had it running on an initial startup a couple of years ago, but wanted to know if I should adjust any of these cells. I'm just now getting back to the project. How do I go about adding another column for 8K rpm? redline will be 7500 to 7800 RPM Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 17, 2023 Report Share Posted June 17, 2023 I would put 1.8ms right across the 14V row and 1.6 across the 15V row, I doubt they will need any more than that for an NA engine and these coils draw a heap of current as you increase dwell. Only add more if you dont have enough ign energy. 12 hours ago, 928sg said: How do I go about adding another column for 8K rpm? You dont really need a 8K column unless you want to change dwell between 7 & 8000. But it you wanted it then click on the table then hit the X key. 928sg 1 Quote Link to comment Share on other sites More sharing options...
928sg Posted June 17, 2023 Author Report Share Posted June 17, 2023 done~! Thanks~! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.