Dhornby88 Posted June 19, 2023 Report Share Posted June 19, 2023 Few questions upon setting up the dash I'm struggling with - Can i change the LAMBDA reading to AFR in race studio ive looked everywhere? - I've got speed running to ecu through DI and its working fine in run time values but it's not sending the speed to the dash, do I have to send the DI to a specific plug on the dash? - Can i manually add what my cars odometer read before i installed the dash - How do i get the gear position reading through CAN? changed thermo fans to 90.pclr Quote Link to comment Share on other sites More sharing options...
Dhornby88 Posted June 19, 2023 Author Report Share Posted June 19, 2023 https://1drv.ms/u/s!Am8vTGV5abqBnEXzPAOcLJ4AqP5k?e=SsDilR Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 19, 2023 Report Share Posted June 19, 2023 To display lambda in AFR units you have to use a math channel. The built-in unit conversion for the lambda channel doesnt work as you may expect, we had to do this to try to keep it backwards compatible with our older ECU's which transmit AFR rather than lambda in the same data position. I have done this in your dash config attached below. 1 hour ago, Dhornby88 said: - I've got speed running to ecu through DI and its working fine in run time values but it's not sending the speed to the dash, do I have to send the DI to a specific plug on the dash? All 4 wheel speeds are sent from the ecu to the dash. Your LR wheel speed should be received as "ECU Speed 2" in the dash. 1 hour ago, Dhornby88 said: - Can i manually add what my cars odometer read before i installed the dash You cant with the actual odometer - that one is not user adjustable and starts at zero. However you can set up one of the other counters, name it Odometer and display that on your screen instead. 2 hours ago, Dhornby88 said: - How do i get the gear position reading through CAN? It is already in the default stream, as long as you have gear detection set up in the ecu and working then it should show on the dash. Quote Link to comment Share on other sites More sharing options...
Dhornby88 Posted June 20, 2023 Author Report Share Posted June 20, 2023 Thanks Adam, can you look at my tune file I attached, the speed is currently being read through DI8. can you assist making that work to read through the dash? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 20, 2023 Report Share Posted June 20, 2023 Just set DI8 function to LF, LR, RF or RR wheel speed. And you can turn off DI3 if that is not being used. Quote Link to comment Share on other sites More sharing options...
Dhornby88 Posted June 28, 2023 Author Report Share Posted June 28, 2023 Hi Adam, See this attached, speed working fine now. Can you add the AFR math channel from LAMBDA, and assist with getting the odometer counter done? I also cant adjust the time or date in RS3, possible bug. Also the case when trying to add more alarms it wont allow me to save it once set up. https://1drv.ms/u/s!Am8vTGV5abqBnHaPqvay5IPAtzBf?e=Eo5xN3 Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 28, 2023 Report Share Posted June 28, 2023 Try this. I have added AFR to page 1. The adjusted ODO is on the bottom of page 4, it should as an example it should add 123000km on to the existing builtin odo value. You can adjust the adder in the math channels. I think your alarm saving issue was because you had oil press set up as an alarm but you didnt have the oil pressure channel checked in the ecu stream tab. Wherever you see yellow exclamation marks means there is something assigned incorrectly. DHornby.zconfig Quote Link to comment Share on other sites More sharing options...
Dhornby88 Posted June 29, 2023 Author Report Share Posted June 29, 2023 10 hours ago, Adamw said: Try this. I have added AFR to page 1. The adjusted ODO is on the bottom of page 4, it should as an example it should add 123000km on to the existing builtin odo value. You can adjust the adder in the math channels. I think your alarm saving issue was because you had oil press set up as an alarm but you didnt have the oil pressure channel checked in the ecu stream tab. Wherever you see yellow exclamation marks means there is something assigned incorrectly. DHornby.zconfig 810.93 kB · 0 downloads Your wonderful Adam, i will apply this and give it a try. Thanks for the support Quote Link to comment Share on other sites More sharing options...
Dhornby88 Posted June 3 Author Report Share Posted June 3 Hi I cant get the blinkers to work on the dash, can you help with the set up? They used to work then once i did a firmware update they stopped working and are constantly lit up XTreme working 01.zconfig Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.