Jump to content

Multiple issues - Fans always running, IAT not registering, E Throttle setup


AGalecki

Recommended Posts

On 9/29/2023 at 4:14 AM, Adamw said:

Is there an alarm or non-factory immobiliser system?  Anything non-factory wired to aux outputs such as fuel pump relays or boost valves?

No alarm or immobilizer, have a boost activated Hobbs switch for secondary pump but, otherwise nothing else. Boost activated secondary fuel pump is just fuse connected direct to battery.

Link to comment
Share on other sites

The only thing that can keep the ecu alive would be a back-feeding aux or something faulty in the ignition circuit.  Since you have added E-throttle, and you are also saying E-throttle dstays on all the time, it sounds like the issue is there somewhere.  

Does the ecu power down if you unplug the e-throttle connector from the board?

Can you attach a copy of your current tune - in the one you attached at the top you have e-throttle relay assigned to aux 9 which should be the motor?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...