Simon_s13 Posted July 3, 2023 Report Share Posted July 3, 2023 Hi I’m running a link Extreme G4+ and I am trying to use a can message as an input to activate and deactivate the launch control and traction control. I believe that the G4+ does not allow me to do it but I like to ask if it will be possible. I have created the message already ID 1100 B0 : traction control B1: launch control Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 4, 2023 Report Share Posted July 4, 2023 There is a native "traction disable sw" CAN input, assign this to byte 0 (start pos 0, width 8), for launch in byte 1 (start pos 8, width 8) receive it into one of the CAN Dig inputs, then assign this as your launch activation control. Quote Link to comment Share on other sites More sharing options...
Simon_s13 Posted July 6, 2023 Author Report Share Posted July 6, 2023 On 7/4/2023 at 1:02 AM, Adamw said: There is a native "traction disable sw" CAN input, assign this to byte 0 (start pos 0, width 8), for launch in byte 1 (start pos 8, width 8) receive it into one of the CAN Dig inputs, then assign this as your launch activation control. Thanks Adamw all is working now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.