oetoet Posted July 11, 2023 Report Share Posted July 11, 2023 hi all, installed a WRX V5-6 G4X plugin to this car. i cant seem to get an RPM reading in pclink. the setup of the car is a V6 reluctor sensor with v6 crank trigger wheel combined with the V10 Hall effect cam sensors. i wired the signal wire of the original reluctor cam sensor to the LH cam sensor, and the signal wire of the RH sensor to DI2. wired +12v and sensor ground to the hall sensors. this should be able to work with the right setup? i guess a final option is to swap the V6 crank triggerwheel over for a V10 wheel, but i first want to try it this way. attached trigger scope, map and log. TriggerScopeLog jermain.llgx PC Datalog - 2023-07-11 4;14;43 pm.llgx gc8 jermain.pclx Quote Link to comment Share on other sites More sharing options...
semih Posted July 11, 2023 Report Share Posted July 11, 2023 i guess you can't mix trigger wheels,if you do not want to use avcs, you can convert v6 trigger setup, but if you want avcs you should use v10 trigger wheel Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 11, 2023 Report Share Posted July 11, 2023 A V6 crank wheel wouldnt work, but the triggerscope shows you already have the correct V10/EJ25 crank trigger wheel, however it is showing on trigger 2 instead of trigger 1. Swap the immobaliser DIP switches on the adapter board to opposite option will swap trig 1 with trig 2. Change trigger mode to EJ25. Do a new scope with those changes. Quote Link to comment Share on other sites More sharing options...
oetoet Posted July 12, 2023 Author Report Share Posted July 12, 2023 7 hours ago, Adamw said: A V6 crank wheel wouldnt work, but the triggerscope shows you already have the correct V10/EJ25 crank trigger wheel, however it is showing on trigger 2 instead of trigger 1. Swap the immobaliser DIP switches on the adapter board to opposite option will swap trig 1 with trig 2. Change trigger mode to EJ25. Do a new scope with those changes. wow, you are right. i even checked it with a camera to confirm, i must have been so sleepy. changed settings to v10 and got rpm but no good scope at the cam sensor. changed polarity on that and all seems good. thanks guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.