taku Posted July 14, 2023 Report Share Posted July 14, 2023 Do you know how to turn on the lamp on the AIM meter side when you set the anti-lag on the LINKECU side and turn on the switch? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 14, 2023 Report Share Posted July 14, 2023 Use the alarms feature to turn on LED's. In this example below I would have #1 LED flashing red when Antilag or cyclic idle is active. The status values arent very clear in the aim settings as they are only a maximum of 4 letters. So, this is what they mean: OFF = switched OFF A AL = Armed and antilag active. OFF2 = RPM is below 500. SA C = System armed, cyclic off. A CA = Armed and cyclic active. C C = Cyclic cooldown active. D CA = disarmed, cyclic active. Another option you can use instead of the LED's is Icons on the screen, example below. Quote Link to comment Share on other sites More sharing options...
taku Posted July 14, 2023 Author Report Share Posted July 14, 2023 I'll try to set it up. Thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.