Sam7 Posted August 3, 2023 Report Share Posted August 3, 2023 I'm wanting to configure my cooling fan and fuel pump power outputs in the PDM based on a digital channel from a Fury G4X. Based on someone else's previous post here I thought I had this sorted but have one small issue that I can't get past. When I go to configure the Power Output in RS3, the Fuel Pump Request digital channel appears as expected but it has no values to select: The only value is Off, there's no On value that can be selected. I guess I must have missed something in the ECU stream config. It appears as a digital channel but has no units so I'm not sure if that's normal or not? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 3, 2023 Report Share Posted August 3, 2023 The values come from the CAN template in RS3 so you must have something set up wrong in there. Can you attach the .xc1 CAN file. Quote Link to comment Share on other sites More sharing options...
Sam7 Posted August 3, 2023 Author Report Share Posted August 3, 2023 Thanks Adam, here is the file. LINK_AE86_@20220217_074819_001620.xc1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 4, 2023 Report Share Posted August 4, 2023 I think there is possibly a bug here as the numeric statuses arent behaving the same as they do in the dashes. Anyhow, I set them up with an encoding table and they appear to work now. Give this a try. LINK_AE86 V2_@20220217_074819_001620.xc1 Quote Link to comment Share on other sites More sharing options...
Sam7 Posted August 6, 2023 Author Report Share Posted August 6, 2023 Thanks Adam, that's working now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.