FTWLegion Posted August 21, 2023 Report Share Posted August 21, 2023 Hey guys, just after a bit of information about wiring in my ross crank/cam trigger kit. Do I Split the power/ground to both sensors and then send each sensor there correct signal wire? It states they need pull up resistors, does the power wire already have that or do i need to wire them in? Gt101 Hall Sensors BTW Thanks in advance Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 21, 2023 Report Share Posted August 21, 2023 Yes, splice the 12V and gnd. The internal pull-up is suitable for a GT101. Note the GT101 is only suitable for the 12T crank wheels, not the missing tooth options. Quote Link to comment Share on other sites More sharing options...
FTWLegion Posted August 22, 2023 Author Report Share Posted August 22, 2023 Thats Great news, im running the 12T crank wheel with there balancer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.