coreyb Posted August 24, 2023 Report Share Posted August 24, 2023 Not sure if this might have been asked before in a thread but I didn't see it as a topic. i have a project that we are looking to use the RAZOR. I am looking to run headlights, turn signals, pump, injectors, fan, coils, etc....with the limited high outputs how can i achieve this in one pdm or would i have to add another to the system? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 24, 2023 Report Share Posted August 24, 2023 I think you would have enough outputs to power what you list, but if you need switches connected for all those devices too I think you will run out of pins quick. Do you have a Link ecu also or are you talking about using the PDM standalone? Quote Link to comment Share on other sites More sharing options...
coreyb Posted August 24, 2023 Author Report Share Posted August 24, 2023 ok...Using STORM with 12 button keypad Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 24, 2023 Report Share Posted August 24, 2023 An example table below showing how I would usually assess and plan IO. So it looks like you will probably need 5 ADIO's for outputs, that will leave you 3 spare. In the case of a race car you could do most of the controls with he keypad, but in a road car it is often nicer to have a "stalk" for at least indicators and high beam which would need to be wired to ADIO's or DI's on the ECU. Quote Link to comment Share on other sites More sharing options...
coreyb Posted August 25, 2023 Author Report Share Posted August 25, 2023 Thanks Adam This helps alot. BeallJK 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.