kevin p Posted September 1, 2023 Report Share Posted September 1, 2023 Hi everyone, I'm having an issue with fueling when accelerating. It seems like the sec injectors pw is not high enough. I've attached the log and file. Thanks for the help. Kevin https://drive.google.com/file/d/1uaXdR40tEclhMDVOJhAMc_dM9tgNnT1J/view?usp=sharing log https://drive.google.com/file/d/1frqD_wS3QdO5_23XBbYvJkcLQN7muqoe/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 1, 2023 Report Share Posted September 1, 2023 You have zeros in your accel sense table all the way up to 3500RPM so you are getting pretty much no accel fuel on the primaries. Start with sens values around 4 will probably be closer. And then I would say you are really bringing the secondaries in too early, your primary duty cycle is only at 16% when your secondaries activate and that drops the pri PW all the way back to <0.7ms so they arent going to be controlling well then. I would personally bring them in say 50kpa and 1000RPM higher so you arent transitioning all the time during normal driving. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.