k fuku Posted September 4, 2023 Report Share Posted September 4, 2023 Appearance of hardware block error after changing to G4X firm 6.24.369 After changing from 6.23.15 to the above new firm, hardware block 2 and 3 appeared in the log check. The error did not appear at all in the previous firm, and it seems that the error clearly occurs in the new firm. No data or harness at all. No changes have been made to the data or harness, only the firmware upgrade. https://drive.google.com/file/d/1Sv07-gwyyr79kSUU8zK70ETsNJggBR3d/view?usp=drivesdk Quote Link to comment Share on other sites More sharing options...
Vaughan Posted September 4, 2023 Report Share Posted September 4, 2023 Those two refer to your Trigger arming voltages, what trigger pattern are you using and what do your trigger arming voltage tables look like? k fuku 1 Quote Link to comment Share on other sites More sharing options...
Vaughan Posted September 4, 2023 Report Share Posted September 4, 2023 I can actually replicate it on an Xtreme on the desk after initially not being able to replicate it on a plugin, will get that sorted. k fuku 1 Quote Link to comment Share on other sites More sharing options...
k fuku Posted September 4, 2023 Author Report Share Posted September 4, 2023 10 minutes ago, Vaughan said: I can actually replicate it on an Xtreme on the desk after initially not being able to replicate it on a plugin, will get that sorted. The trigger voltage is as follows No changes have been made. Is it safe to assume that this error is fine to ignore until the software is corrected? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted September 6, 2023 Report Share Posted September 6, 2023 Has been fixed and there should be a new PCLink installer on the website within the next few hours. k fuku 1 Quote Link to comment Share on other sites More sharing options...
k fuku Posted September 6, 2023 Author Report Share Posted September 6, 2023 1 hour ago, Vaughan said: Has been fixed and there should be a new PCLink installer on the website within the next few hours. Thank you for your prompt response. I will try it later and report the results. Quote Link to comment Share on other sites More sharing options...
k fuku Posted September 6, 2023 Author Report Share Posted September 6, 2023 I was able to solve the problem successfully, thank you. https://drive.google.com/file/d/18lQPG4fYtax7UEQhzrjZpy0ECzSmrAUo/view?usp=drivesdk Vaughan 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.