JZJOE80 Posted September 6, 2023 Report Share Posted September 6, 2023 Can Lambda related question. it seems like my friend who was working on my car, for some reason cut the plug from the ecu and the can lambda unit itself. (i’m really unsure as to why) i’m in the middle of trying to rewire it but unsure. these are the sequence of my wires coming from the unit 1. red/power- 2. brown/ground- 3. white/ can L- 4. green/can h- can anyone help a brother out? do the green and white connect to the green and white off the ecu can wires? TS2JZX+ on a wiring specialties harness Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 7, 2023 Report Share Posted September 7, 2023 Im not quite sure what you are asking. White is CAN H and green is CAN L, so it is opposite of what you quote, and yes, they would usually connect to white and green at the ecu end if using a Link CAN cable. The two connectors shown in your pic appear to be pinned correctly. Quote Link to comment Share on other sites More sharing options...
JZJOE80 Posted September 7, 2023 Author Report Share Posted September 7, 2023 3 minutes ago, Adamw said: Im not quite sure what you are asking. White is CAN H and green is CAN L, so it is opposite of what you quote, and yes, they would usually connect to white and green at the ecu end if using a Link CAN cable. The two connectors shown in your pic appear to be pinned correctly. sorry adam, i double checked my notes and what i have in front of me and didn’t realize it was correct all along. just over thinking and going crazy as always thank you forever Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.