k fuku Posted September 12, 2023 Report Share Posted September 12, 2023 Question about WRX V11 basemap Let me start off by saying, this may be a very silly question. MGP on axis of charge temperature MAP for the axis of VE table Is there a reason for this? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 12, 2023 Report Share Posted September 12, 2023 No there is no specific reason for that, likely it just ended up that way based on the map I started with. Where I live (and where I tuned that car) is quite stable baro and very little altitude change so either load option would work just as well for me. But if you have significant altitude change where you drive then you may see a small improvement in fuel control if you change the main fuel table to MGP. BAP is nearly always 99-100Kpa here so you should be able to change to MGP and just subtract 100 from the existing axis values without messing anything up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.