JMP Posted September 13, 2023 Report Share Posted September 13, 2023 When using an exhaust pressure sensor, it looks like that reading is used for compensation on both lambda controllers. Is there a way currently or maybe future plans to be able to assign individual exhaust pressure sensors to each lambda controller, for a scenario where you're reading 2 different banks for instance Quote Link to comment Share on other sites More sharing options...
Vaughan Posted September 13, 2023 Report Share Posted September 13, 2023 Have a read of the info in this post JMP 1 Quote Link to comment Share on other sites More sharing options...
JMP Posted September 14, 2023 Author Report Share Posted September 14, 2023 Lots of good info there, racking my brain to think how similar can be done to address the internal lambda controllers Quote Link to comment Share on other sites More sharing options...
Vaughan Posted September 14, 2023 Report Share Posted September 14, 2023 6 minutes ago, JMP said: Lots of good info there, racking my brain to think how similar can be done to address the internal lambda controllers This would require a software change in the ECU, maybe make a request to Tech support for this feature if it is something you are wanting Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.