cubeqtio Posted September 18, 2023 Report Share Posted September 18, 2023 Hi, I have a problem with my G4+ PnP mitsubishi Evo ecu. Past 7 (or even more) years I haven been running my Innocate LC-1 as main lambda driver. As it died I got the Can Lamda. Did the wiring as it supposed and found the Can Lambda unit via Can settings and from the "find devices". It was assigned to Lambda 1. From after that I started to have problems. No lambda value or temperature at all even though I start the car. The Innovate is disconnected and IN THE BIN so it should not affect. Also removed the AN4 setting to OFF (the innovate was there). I can find the Can lambda via the can settings scan and have set it to my CAN 2 first device and the id to 950. Running fw 5.6.5 at the moment and now going to go and update it to the latest. Please help me as soon as you can. Thanks. Some pics. Quote Link to comment Share on other sites More sharing options...
cubeqtio Posted September 18, 2023 Author Report Share Posted September 18, 2023 So started it before doing the update. Error codes 16, 33 and 34 when the engine is running. Temperature is reading but lambda 0.000. Won’t update the ecu yet. Waiting someone to reply. thanks. Quote Link to comment Share on other sites More sharing options...
Confused Posted September 18, 2023 Report Share Posted September 18, 2023 How have you provided power to the CAN Lambda module? Have you tried installing the 22uF capacitor as suggested in the Alternative wiring diagram. A 16 error is often power supply issue. cubeqtio 1 Quote Link to comment Share on other sites More sharing options...
cubeqtio Posted September 18, 2023 Author Report Share Posted September 18, 2023 Aaaaand replying to myself. cause of problem was a bad power input. Tried straight from the battery and worked straight away. silly me. Quote Link to comment Share on other sites More sharing options...
cubeqtio Posted September 18, 2023 Author Report Share Posted September 18, 2023 24 minutes ago, Confused said: How have you provided power to the CAN Lambda module? Have you tried installing the 22uF capacitor as suggested in the Alternative wiring diagram. A 16 error is often power supply issue. You nailed it. Bad power supply. My fault totally. Quote Link to comment Share on other sites More sharing options...
cubeqtio Posted September 18, 2023 Author Report Share Posted September 18, 2023 Still having error in CAN2 but the lambda still works.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.