coreyb Posted September 28, 2023 Report Share Posted September 28, 2023 Need some help with gaining connection to AEM dash with link Monsoon G4x i have attached map and dash configuration file MudMissleDashSetup.aemcd7 MudMissleFinalMap.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 29, 2023 Report Share Posted September 29, 2023 Your dash setup looks ok as is, but the ecu set up should look like below. Bits in blue are what you need to change: Quote Link to comment Share on other sites More sharing options...
coreyb Posted September 29, 2023 Author Report Share Posted September 29, 2023 Thanks Adam Will try those setting and let you know if it works. I can connect to the CAN 1 from the AEM dash? Do i have to load a stream? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 29, 2023 Report Share Posted September 29, 2023 9 hours ago, coreyb said: I can connect to the CAN 1 from the AEM dash? Sorry not sure what you mean? The ECU connection on the AEM dash is usually CAN2, CAN1 is used for their other accessories. You can use CAN1 if you wish, just the plug labelled ecu on their loom is CAN 2. Quote Link to comment Share on other sites More sharing options...
coreyb Posted October 3, 2023 Author Report Share Posted October 3, 2023 Thanks Adam We are up and running. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.